
24 HOUR PROTECTION
Our Hospital Grade disinfectant stays on surfaces and fabrics for up to 24 hours, killing 99.999% of bacteria. It is also effective against Human Coronavirus and Covid-19.
It eliminates odour-causing bacteria and inhibits mould and mildew.
SIQURA will destroy bacteria on the treated surface. Allowing the product to dry will also coat the surface with a microscopic protective layer for continuous protection.
It is ideal for use around children, pets and plants.
AUSTRALIAN MADE AND OWNED
Products made from local and imported ingredients.
Usage
SIMPLE & EASY
SIQURA is pre-mixed and ready to use.
DO NOT DILUTE.
Decant liquid into suitable trigger applicator. Ensure the surface to be treated is clean and dry. Shake well and hold the container upright, approx. 200mm from the surface. Spray the entire surface area, making sure it is completely covered. Allow the surface to dry. Do not wipe dry as this will remove the coating prior to bonding. Reapply during your next cleaning cycle. Do not mix with detergents or other chemicals. Surfaces remain protected for up to 24 hours unless heavy abrasion occurs.
For fabric application spray on fabrics until damp and allow to dry completely.
HERE ARE SOME PLACES WHERE PEOPLE ARE USING SIQURA
Yes, this is Hospital Grade, though it is widely used across many industries, to ensure surfaces are free from bacteria & virus's:
- Restaurants & cafes
- Childcare
- Aged & disability care
- Bathrooms
- Schools
- Office spaces & equipment
- Gyms & fitness centres
- Kitchens - at home & hospitality
- Public transport
- Wiping down your car, or ride share
- Walls, floors and door handles
- Retail spaces
- Animal care
- Hospitals & GP's
Safety
LISTED ON THE ARTG
SIQURA is listed on the ARTG as a hospital grade surface disinfectant that kills >99.999% of bacteria, and forms a long lasting, invisible barrier which defends surfaces against microbial attack (and biofilm formation), continually for up to 24 hours. The Siqura active is US EPA listed. SIQURA Hospital Grade Surface Disinfectant meets or exceeds EN1276 and AOAC 991.47/48/49 hard surface carrier test.
BONDS TO SURFACES
SIQURA hospital grade surface disinfectant is applied wet onto clean dry surfaces. As it dries, it forms an organo-silane matrix of electrostatically charged spikes that bond to a diverse range of surfaces and substrates. Unlike all non-bound disinfectants, SIQURA does not leach from (or leave) the treated surface, it does not deplete in microbial efficacy, create a field of inhibition or promote microbial resistance.
FRIENDLY FOR THE PEOPLE AND THE ENVIRONMENT
SIQURA is the smarter clean, being convenient to use, sustainable, non-leaching, long lasting and above all, friendly to humans, pets and plants. SIQURA contains no chlorines, bleaches, carcinogenic or endocrine disruptive compounds and in final life, SIQURA breaks down to form harmless organic compounds. It is non-staining, pH neutral and non-corrosive, making it suitable for a wide variety of healthcare and commercial applications.
NON STOP PROTECTION
Through a bio mechanical process, the electrostatic charge interacts with the bacteria lipid layer, resulting in permanent destruction of the bacterial cell. Because the organo-silane isn’t consumed in the disinfection process, it remains ready to continually defend treated surfaces against contamination and bio film formation.
BROAD SPECTRUM ACTIVITY
SIQURA hospital grade surface disinfectant has been tested against a wide range of pathogens include Escherichia Coli [ATCC 8739], Pseudomonas aeruginosa [ATCC 15442], Staphylococcus aureus [ATCC 6538], Enterococcus Hirae [ATCC 10541], Salmonella choleraesuis [ATCC 10708] and other bacteria. SIQURA hospital grade surface disinfectant meets or exceeds EN1276 and AOAC 991.47/48/49 hard surface carrier test.
Resources
ADDITIONAL RESOURCES